Daewook Kim
- Associate Professor, Optical Sciences
- Associate Professor, Astronomy
- Member of the Graduate Faculty
Contact
- (520) 626-9210
- Meinel Optical Sciences, Rm. 633
- Tucson, AZ 85721
- dkim@optics.arizona.edu
Awards
- SPIE Community Champion
- SPIE, Summer 2021
- SPIE Fellow
- SPIE, Winter 2020
- OSA Spotlight on Optics
- OSA, Fall 2019
- OSA Senior Member
- OSA, Summer 2018
- SPIE Senior Member
- SPIE, Summer 2018
Interests
No activities entered.
Courses
2024-25 Courses
-
Directed Graduate Research
OPTI 792 (Fall 2024) -
Dissertation
OPTI 920 (Fall 2024) -
Fndmtls Applied Optics Lab
OPTI 502L (Fall 2024) -
Master's Report
OPTI 909 (Fall 2024) -
Thesis
OPTI 910 (Fall 2024)
2023-24 Courses
-
Independent Study
OPTI 599 (Summer I 2024) -
Directed Graduate Research
OPTI 792 (Spring 2024) -
Dissertation
OPTI 920 (Spring 2024) -
Master's Report
OPTI 909 (Spring 2024) -
Optical Testing
OPTI 513R (Spring 2024) -
Optical Testing Lab
OPTI 513L (Spring 2024) -
Thesis
OPTI 910 (Spring 2024) -
Directed Graduate Research
OPTI 792 (Fall 2023) -
Dissertation
OPTI 920 (Fall 2023) -
Fndmtls Applied Optics Lab
OPTI 502L (Fall 2023) -
Independent Study
OPTI 599 (Fall 2023) -
Master's Report
OPTI 909 (Fall 2023) -
Thesis
OPTI 910 (Fall 2023)
2022-23 Courses
-
Master's Report
OPTI 909 (Summer I 2023) -
Thesis
OPTI 910 (Summer I 2023) -
Directed Graduate Research
OPTI 792 (Spring 2023) -
Dissertation
OPTI 920 (Spring 2023) -
Master's Report
OPTI 909 (Spring 2023) -
Optical Testing
OPTI 513R (Spring 2023) -
Optical Testing Lab
OPTI 513L (Spring 2023) -
Thesis
OPTI 910 (Spring 2023) -
Directed Graduate Research
OPTI 792 (Fall 2022) -
Dissertation
OPTI 920 (Fall 2022) -
Fndmtls Applied Optics Lab
OPTI 502L (Fall 2022) -
Independent Study
OPTI 599 (Fall 2022) -
Thesis
OPTI 910 (Fall 2022)
2021-22 Courses
-
Dissertation
OPTI 920 (Spring 2022) -
Independent Study
OPTI 599 (Spring 2022) -
Independent Study
PHYS 499 (Spring 2022) -
Master's Report
OPTI 909 (Spring 2022) -
Optical Testing
OPTI 513R (Spring 2022) -
Optical Testing Lab
OPTI 513L (Spring 2022) -
Thesis
OPTI 910 (Spring 2022) -
Directed Research
OPTI 392 (Fall 2021) -
Dissertation
OPTI 920 (Fall 2021) -
Fndmtls Applied Optics Lab
OPTI 502L (Fall 2021) -
Master's Report
OPTI 909 (Fall 2021) -
Thesis
OPTI 910 (Fall 2021)
2020-21 Courses
-
Diffraction+Interferomet
OPTI 505R (Spring 2021) -
Directed Graduate Research
OPTI 792 (Spring 2021) -
Directed Research
OPTI 492 (Spring 2021) -
Dissertation
OPTI 920 (Spring 2021) -
Independent Study
OPTI 599 (Spring 2021) -
Master's Report
OPTI 909 (Spring 2021) -
Optical Testing
OPTI 513R (Spring 2021) -
Optical Testing Lab
OPTI 513L (Spring 2021) -
Research
OPTI 900 (Spring 2021) -
Thesis
OPTI 910 (Spring 2021) -
Directed Research
OPTI 492 (Fall 2020) -
Directed Research
PHYS 392 (Fall 2020) -
Dissertation
OPTI 920 (Fall 2020) -
Independent Study
OPTI 599 (Fall 2020) -
Intro Opto-Mech Engr
OPTI 421 (Fall 2020) -
Intro Opto-Mech Engr
OPTI 521 (Fall 2020) -
Master's Report
OPTI 909 (Fall 2020) -
Thesis
OPTI 910 (Fall 2020)
2019-20 Courses
-
Thesis
OPTI 910 (Summer I 2020) -
Directed Graduate Research
OPTI 792 (Spring 2020) -
Directed Research
OPTI 492 (Spring 2020) -
Dissertation
OPTI 920 (Spring 2020) -
Master's Report
OPTI 909 (Spring 2020) -
Optical Testing
OPTI 513R (Spring 2020) -
Optical Testing Lab
OPTI 513L (Spring 2020) -
Research
OPTI 900 (Spring 2020) -
Thesis
OPTI 910 (Spring 2020) -
Directed Graduate Research
OPTI 792 (Fall 2019) -
Fndmtls Applied Optics Lab
OPTI 502L (Fall 2019) -
Independent Study
OPTI 599 (Fall 2019) -
Master's Report
OPTI 909 (Fall 2019) -
Research
OPTI 900 (Fall 2019) -
Thesis
OPTI 910 (Fall 2019)
2018-19 Courses
-
Master's Report
OPTI 909 (Summer I 2019) -
Directed Graduate Research
OPTI 792 (Spring 2019) -
Dissertation
OPTI 920 (Spring 2019) -
Independent Study
OPTI 599 (Spring 2019) -
Master's Report
OPTI 909 (Spring 2019) -
Optical Testing
OPTI 513R (Spring 2019) -
Thesis
OPTI 910 (Spring 2019) -
Directed Graduate Research
OPTI 792 (Fall 2018) -
Directed Research
OPTI 392 (Fall 2018) -
Dissertation
OPTI 920 (Fall 2018) -
Fndmtls Applied Optics Lab
OPTI 502L (Fall 2018) -
Master's Report
OPTI 909 (Fall 2018) -
Thesis
OPTI 910 (Fall 2018)
2017-18 Courses
-
Directed Research
OPTI 492 (Summer I 2018) -
Master's Report
OPTI 909 (Summer I 2018) -
Thesis
OPTI 910 (Summer I 2018) -
Dissertation
OPTI 920 (Spring 2018) -
Independent Study
OPTI 599 (Spring 2018) -
Master's Report
OPTI 909 (Spring 2018) -
Optical Testing
OPTI 513R (Spring 2018) -
Thesis
OPTI 910 (Spring 2018) -
Dissertation
OPTI 920 (Fall 2017) -
Independent Study
OPTI 499 (Fall 2017) -
Intro Opto-Mech Engr
OPTI 421 (Fall 2017) -
Intro Opto-Mech Engr
OPTI 521 (Fall 2017) -
Thesis
OPTI 910 (Fall 2017)
2016-17 Courses
-
Directed Research
OPTI 492 (Summer I 2017) -
Thesis
OPTI 910 (Summer I 2017) -
Directed Graduate Research
OPTI 792 (Spring 2017) -
Dissertation
OPTI 920 (Spring 2017) -
Honors Independent Study
OPTI 299H (Spring 2017) -
Optical Testing
OPTI 513R (Spring 2017) -
Research
OPTI 900 (Spring 2017) -
Thesis
OPTI 910 (Spring 2017) -
Dissertation
OPTI 920 (Fall 2016) -
Fndmtls Applied Optics Lab
OPTI 502L (Fall 2016) -
Honors Independent Study
OPTI 299H (Fall 2016) -
Master's Report
OPTI 909 (Fall 2016) -
Thesis
OPTI 910 (Fall 2016)
2015-16 Courses
-
Directed Research
OPTI 492 (Summer I 2016) -
Dissertation
OPTI 920 (Spring 2016) -
Independent Study
OPTI 599 (Spring 2016) -
Thesis
OPTI 910 (Spring 2016)
Scholarly Contributions
Books
- Kim, D. (2021). Review of Optical Manufacturing 2000 to 2020. SPIE Press.More infoBook chapter: “Review of Optical Manufacturing 2000 to 2020” (edited by Aizhong Zhang and Richard Youngworth), Chapter “Metrology” by Daewook Kim, Logan Graves, and Isaac Trumper, SPIE Press, ISBN: 9781510645363, 2021
- Kim, D. (2020). Astronomical Freeform Optics Fabrication and Testing. Springer Nature.More infoThis is a short video book teaching the astronomical freeform optics fabrication and testing process.
Journals/Publications
- "Ji, T. G., Park, W., Pak, S., Jeong, B., Kim, S., Lee, H. I., Lee, S., Hyun, S., Kim, G. H., & Kim, D. W. (2021). Error Compensation Software to Remove the Low-Frequency Error of Aluminum Freeform Mirror for an Infrared Off-Axis Telescope. Journal of the Korean Society for Precision Engineering, "38"("5"), "329--336".
- Choi, H., Trumper, I. L., Feng, Y., Kang, H., Berkson, J., Chung, H., Hamden, E. T., & Kim, D. W. (2021). Long-slit cross-dispersion spectroscopy for Hyperion UV space telescope. Journal of Astronomical Telescopes, Instruments, and Systems, 7(1), 1 -- 14.
- Hefferan, T., Graves, L., Trumper, I., Pak, S., & Kim, D. (2021). Parametric Mid-Spatial Frequency Surface Error Synthesis. Photonics, 8(12).
- Jeong, H. B., Park, J., Kim, D., & Joo, K. (2021). Polarized imaging interpreter for simultaneous clocking metrology of multiple objects. Opt. Lett., 46(19), 4992--4995.
- Kang, H., Quach, H., Berkson, J., Aftab, M., Smith, G., Choi, H., & Kim, D. (2021). Computational vector fiducial for deflectometry system alignment. Opt. Lett., 46(22), 5571--5574.
- Kim, D. (2021). Advances in Optical Engineering for Future Telescopes. Opto-Electron Adv. doi:10.29026/oea.2021.210040
- Kim, D. W., Smith, G., Dubin, M., Lowman, A., Oh, C., Quach, H., Kang, H. M., Yoo, H., Trumper, I., Graves, L., Aftab, M., Davila, C., Hyatt, J., & Choi, H. (2021). Advances in reconfigurable optical design, metrology, characterization, and data analysis. Journal of Physics: Photonics.
- Shimizu, Y., Chen, L. C., Kim, D. W., Chen, X., Li, X., & Matsukuma, H. (2021). An insight on optical metrology in manufacturing. Measurement Science and Technology.
- Wang, T., Huang, L., Choi, H., Vescovi, M., Kuhne, D., Zhu, Y. i., Pullen, W. C., Ke, X., Kim, D. W., Kemao, Q., Tayabaly, K., Bouet, N., & Idir, M. (2021). RISE: robust iterative surface extension for sub-nanometer X-ray mirror fabrication. Opt. Express, 29(10), 15114--15132.
- Wang, T., Huang, L., Vescovi, M., Kuhne, D., Zhu, Y. i., Negi, V. S., Zhang, Z., Wang, C., Ke, X., Choi, H., Pullen, W. C., Kim, D., Kemao, Q., Nakhoda, K., Bouet, N., & Idir, M. (2021). Universal dwell time optimization for deterministic optics fabrication. Opt. Express, 29(23), 38737--38757.
- Cha, H. A., Kim, B. J., Cha, M., Choi, H., & Kim, D. W. (2020). Interference of two diverging beams reflected from a plane parallel plate: stationary fringes with characteristic stable period. Appl. Opt., 59(28), 8568--8574.
- Eom, Y., Yang, S., Yoon, E. G., Choi, J., Ryu, D., Kim, D. W., Kim, J., Song, J. S., Kim, S., & Kim, H. M. (2020). Multizonal Design Multifocal Intraocular Lens-Induced Astigmatism According to Orientation.. Journal of refractive surgery, 36 11, 740-748.
- Ke, X., Wang, T., Choi, H., Pullen, W., Huang, L., Idir, M., & Kim, D. W. (2020). Dual-tool multiplexing model of parallel computer controlled optical surfacing. Opt. Lett., 45(23), 6426--6429.
- Lee, S., & Kim, D. W. (2020). Two-dimensional Fourier domain Ronchi ruling measurement using Talbot-based crossing point modeling. Optical Engineering, 59(1), 1 -- 8.
- Negi, V. S., Garg, H., RR, S. K., Karar, V., Tiwari, U. K., & Kim, D. W. (2020). Parametric removal rate survey study and numerical modeling for deterministic optics manufacturing. Opt. Express, 28(18), 26733--26749.
- Park, W., Chang, S., Lim, J. H., Lee, S., Ahn, H., Kim, Y., Kim, S., Hammar, A., Jeong, B., Kim, G. H., Lee, H., Kim, D. W., & Pak, S. (2020). Development of Linear Astigmatism Free\textemdashThree Mirror System (LAF-TMS). Publications of the Astronomical Society of the Pacific, 132(1010), 044504.
- Park, W., Hammar, A., Pak, S., Chang, S., Gumbel, J., Megner, L., Christensen, O. M., Rouse, J., & Kim, D. W. (2020). Flight model characterization of the wide-field off-axis telescope for the MATS satellite. Appl. Opt., 59(17), 5335--5342.
- Park, W., Pak, S., Kim, G. H., Lee, S., Chang, S., Kim, S., Jeong, B., Brendel, T. J., & Kim, D. W. (2020). Transformable Reflective Telescope for optical testing and education. Appl. Opt., 59(18), 5581--5588.
- Shang, J., Liu, Y., Sun, J., Kim, D. W., Chen, W., & He, Y. (2020). Five-channel fiber-based laser Doppler vibrometer for underwater acoustic field measurement. Appl. Opt., 59(3), 676--682.
- Shimizu, Y., Chen, L. C., Kim, D. W., Chen, X., Li, X., & Matsukuma, H. (2020). An insight on optical metrology in manufacturing. Measurement Science and Technology.
- Trumper, I., Anderson, A. Q., Howard, J. M., West, G., & Kim, D. W. (2020). Design form classification of two-mirror unobstructed freeform telescopes. Optical Engineering, 59(2), 1 -- 15.
- Wang, T., HUANG, L., Kang, H., Choi, H., Kim, D. W., Tayabaly, K., & Idir, M. (2020). RIFTA: A Robust Iterative Fourier Transform-based dwell time Algorithm for ultra-precision ion beam figuring of synchrotron mirrors. Scientific Reports, 10, 8135.
- Wang, T., Huang, L., Zhu, Y. i., Vescovi, M., Khune, D., Kang, H., Choi, H., Kim, D. W., Tayabaly, K., Bouet, N., & Idir, M. (2020). Development of a position--velocity--time-modulated two-dimensional ion beam figuring system for synchrotron x-ray mirror fabrication. Appl. Opt., 59(11), 3306--3314.
- Aftab, M., Burge, J. H., Smith, G. A., Graves, L., Oh, C., & Kim, D. W. (2019). Modal Data Processing for High Resolution Deflectometry. International Journal of Precision Engineering and Manufacturing-Green Technology, 6(2), 255--270.
- Aftab, M., Graves, L. R., Burge, J. H., Smith, G. A., Oh, C. J., & Kim, D. W. (2019). Rectangular domain curl polynomial set for optical vector data processing and analysis. Optical Engineering, 58(9), 1 -- 10.
- Apai, D., Milster, T. D., Kim, D. W., Bixel, A., Schneider, G., Liang, R., & Arenberg, J. (2019). A Thousand Earths: A Very Large Aperture, Ultralight Space Telescope Array for Atmospheric Biosignature Surveys. The Astronomical Journal, 158(2), 83.
- Choi, H., Kam, J. M., Berkson, J. D., Graves, L. R., & Kim, D. W. (2019). Modulated dark-field phasing detection for automatic optical inspection. Optical Engineering, 58(9), 1 -- 6.
- Dominguez, M. Z., Kang, H., Kim, S., Berrier, J., Chambers, V. J., Gong, Q., Hagopian, J. G., Marx, C. T., Seide, L., & Kim, D. W. (2019). Multi-field merit-function-based regression method for Wide Field Infrared Survey Telescope grism system alignment. Appl. Opt., 58(25), 6802--6812.
- Graves, L. R., Quach, H., Choi, H., & Kim, D. W. (2019). Infinite deflectometry enabling 2pi-steradian measurement range. Opt. Express, 27(5), 7602--7615.
- Graves, L. R., Quach, H., Koshel, R. J., Oh, C., & Kim, D. W. (2019). High contrast thermal deflectometry using long-wave infrared time modulated integrating cavity source. Opt. Express, 27(20), 28660--28678.
- Graves, L. R., Smith, G. A., Apai, D., & Kim, D. W. (2019). Precision Optics Manufacturing and Control for Next-Generation Large Telescopes. Nanomanufacturing and Metrology, 2(2), 65--90.
- Guo, X., Shu, Y., Kim, G., Palmer, M., Choi, H., & Kim, D. W. (2019). Pseudorandom orbiting stroke for freeform optics postprocessing. Optical Engineering, 58(9), 1 -- 8.
- Han, J., Lee, S., & Kim, D. W. (2019). Parametric geometry analysis for circular-aperture off-axis parabolic mirror segment. Journal of Astronomical Telescopes, Instruments, and Systems, 5(2), 1 -- 6.
- Huang, L., Wang, T., Nicolas, J., Vivo, A., Polack, F., Thomasset, M., Zuo, C., Tayabaly, K., Kim, D. W., & Idir, M. (2019). Two-dimensional stitching interferometry for self-calibration of high-order additive systematic errors. Opt. Express, 27(19), 26940--26956.
- Trumper, I. L., Marrone, D. P., & Kim, D. W. (2019). Utilizing freeform optics in dynamic optical configuration designs. Journal of Astronomical Telescopes, Instruments, and Systems, 5(3), 1 -- 9.
- Trumper, I., Aftab, M., & Kim, D. W. (2019). Freeform surface selection based on parametric fitness function using modal wavefront fitting. Opt. Express, 27(5), 6815--6831.
- Aftab, M., Choi, H., Liang, R., & Kim, D. W. (2018). Adaptive Shack-Hartmann wavefront sensor accommodating large wavefront variations. Opt. Express, 26(26), 34428--34441.
- Faehnle, O., Rascher, R., Vogt, C., & Kim, D. W. (2018). Closed-loop laser polishing using in-process surface finish metrology. Appl. Opt., 57(4), 834--838.
- Graves, L. R., Choi, H., Zhao, W., Oh, C. J., Su, P., Su, T., & Kim, D. W. (2018). Model-free deflectometry for freeform optics measurement using an iterative reconstruction technique. Opt. Lett., 43(9), 2110--2113.
- Hunacek, J., Bock, J., Bradford, C. M., Butler, V., Chang, T., Cheng, Y., Cooray, A., Crites, A., Frez, C., Hailey-Dunsheath, S. .., Hoscheit, B., Kim, D. W., Li, C., Marrone, D., Moncelsi, L., Shirokoff, E., Steinbach, B., Sun, G., Trumper, I., , Turner, A., et al. (2018). Hafnium Films and Magnetic Shielding for TIME, A mm-Wavelength Spectrometer Array. Journal of Low Temperature Physics, 193(5), 893--900.
- Trumper, I., Hallibert, P., Arenberg, J. W., Kunieda, H., Guyon, O., Stahl, H. P., & Kim, D. W. (2018). Optics technology for large-aperture space telescopes: from fabrication to final acceptance tests. Adv. Opt. Photon., 10(3), 644--702.
- Trumper, I., Jannuzi, B. T., & Kim, D. W. (2018). Emerging technology for astronomical optics metrology. Optics and Lasers in Engineering, 104, 22 - 31.
- Z., M., T., C., , Q., G., J., , U., H., J., & , D. W. (2018). Infrared computer-generated holograms: design and application for the WFIRST grism using wavelength-tuning interferometry. Optical Engineering, 57(7), 1-11.
- Choi, H., Trumper, I., Dubin, M., Zhao, W., & Kim, D. W. (2017). Simultaneous multi-segmented mirror orientation test system using a digital aperture based on sheared Fourier analysis. Optics express, 25(15), 18152--18164.
- Del, H. J., Choi, H., Burge, J. H., Kim, G., & Kim, D. W. (2017). Experimental power spectral density analysis for mid-to high-spatial frequency surface error control. Applied optics, 56(18), 5258--5267.
- Huang, L., Zhou, C., Zhao, W., Choi, H., Graves, L., & Kim, D. W. (2017). Close-loop performance of a high precision deflectometry controlled deformable mirror (DCDM) unit for wavefront correction in adaptive optics system. Optics Communications.
- Trumper, I., Jannuzi, B. T., & Kim, D. W. (2017). Emerging technology for astronomical optics metrology. Optics and Lasers in Engineering.
- Eom, Y., Kim, D. W., Ryu, D., Kim, J., Yang, S. K., Song, J. S., Kim, S., & Kim, H. M. (2016). Ring-shaped dysphotopsia associated with posterior chamber phakic implantable collamer lenses with a central hole. Acta Ophthalmologica.
- Eom, Y., Ryu, D., Kim, D. W., Yang, S., Song, J., Kim, S., & Kim, H. (2016). Development of a program for toric intraocular lens calculation considering posterior corneal astigmatism, incision-induced posterior corneal astigmatism, and effective lens position. Graefe's Archive for Clinical and Experimental Ophthalmology. doi:10.1007/s00417-016-3446-3
- Huang, L., Choi, H., Zhao, W., Graves, L. R., & Kim, D. W. (2016). Adaptive interferometric null testing for unknown freeform optics metrology. Opt. Lett., 41(23), 5539--5542.
- Lee, S., Choi, H., & Kim, D. W. (2016). Precise and fast spatial-frequency analysis using the iterative local Fourier transform. Opt. Express, 24(19), 22110--22120.
- Trumper, I., Choi, H., & Kim, D. W. (2016). Instantaneous phase shifting deflectometry. Opt. Express, 24(24), 27993--28007.
- Choi, J. N., Ryu, D., Kim, S., Kim, D. W., Su, P., Huang, R., Kim, Y., & Yang, H. (2015). Integrated Ray Tracing simulation of the SCOTS surface measurement test for the GMT Fast Steering Mirror Prototype. Advances in Space Research, 56, 2483--2494.
- Park, R., Kim, D. W., & Barrett, H. H. (2013). Synthetic phase-shifting for optical testing: Point-diffraction interferometry without null optics or phase shifters. Optics express, 21, 26398--26417.
- Shu, Y., Kim, D. W., Martin, H. M., & Burge, J. H. (2013). Correlation-based smoothing model for optical polishing. Optics express, 21, 28771--28782.
- Kim, D. W., Cai, W., & Burge, J. H. (2012). Use of thermal sieve to allow optical testing of cryogenic optical systems. Optics express, 20, 12378--12392.
- Kim, D. W., & Burge, J. H. (2010). Rigid conformal polishing tool using non-linear visco-elastic effect. Optics express, 18, 2242--2257.
- Kim, D. W., Park, W. H., An, H. K., & Burge, J. H. (2010). Parametric smoothing model for visco-elastic polishing tools. Optics express, 18, 22515--22526.
- Kim, D. W., Kim, S., & Burge, J. H. (2009). Non-sequential optimization technique for a computer controlled optical surfacing process using multiple tool influence functions. Optics express, 17, 21850--21866.
- Kim, D. W., Park, W. H., Kim, S., & Burge, J. H. (2009). Parametric modeling of edge effects for polishing tool influence functions. Optics express, 17, 5656--5665.
- Kim, D. W., & Kim, S. (2005). Static tool influence function for fabrication simulation of hexagonal mirror segments for extremely large telescopes. optics express, 13, 910--917.
Proceedings Publications
- Kim, D. (2021). Inflatable Space Terahertz Optics Technology. In Frontiers in Optics and Photonics 2021.
- Kim, D. (2021). Multiplexed Computer Controlled Optical Surfacing using Multiple Tools. In European Optical Society Annual Meeting (EOSAM).
- Kim, D. (2021). Scalable optical design and technology for extremely large space telescopes. In International Conference on Nanomanufacturing.More infoDaewook Kim, Heejoo Choi, Marcos Esperza, Karlene Karrfalt, Ki-Nam Joo, “Scalable optical design and technology for extremely large space telescopes,” International Conference on Nanomanufacturing, (Nov 2021).
- Aftab, M., & Kim, D. W. (2021, 2021). Vector Polynomials for Gradient Metrology Data Processing. In OSA Technical Digest, OW3B.1.
- Arenberg, J. W., Villareal, M. N., Yamane, J., Yu, T., Lazear, J., Pohner, J., Sangalis, M., Jackson, S. L., Morse, E., Tyler, R., Ghosh, P., Palisoc, A., Walker, C. K., Takashima, Y., Kim, D., Sirsi, S., & Chandra, A. (2021, 2021/8/24). OASIS architecture: key features. In OASIS architecture: key features, 11820.
- Ashcraft, J. N., Choi, H., Heap, S. R., Woodruff, R. A., & Kim, D. W. (2021, 2021/8/24). Cosmic evolution through UV surveys (CETUS): point spread function analysis of three mirror anastigmat telescope. In Cosmic evolution through UV surveys (CETUS): point spread function analysis of three mirror anastigmat telescope, 11820.
- Ashcraft, J. N., Douglas, E. S., Kim, D., Smith, G. A., Cahoy, K., Connors, T., Derby, K. Z., Gasho, V., Gonzales, K., Guthery, C. E., Kim, G. H., Sauve, C., & Serra, P. (2021, 2021/8/20). The versatile CubeSat Telescope: going to large apertures in small spacecraft. In The versatile CubeSat Telescope: going to large apertures in small spacecraft, 11819.
- Berkson, J., Hatfield, Z., Peter, A. S., Quach, H., Rodriguez, E., Nguyen, N., Ellis, W., Derby, K., Davila-Peralta, C., Hyatt, J., & Kim, D. W. (2021, 2021). Meter-Class Infrared Deflectometry for Visibly Non-Specular Surface Metrology. In OSA Technical Digest, JTu2B.3.
- Berkson, J., Rodriguez, E., Hatfield, Z., Peter, A. S., Nguyen, N., Allen, B., Ellis, W., Davila-Peralta, C., Hyatt, J., & Kim, D. W. (2021, 2021). Fringe Projection Metrology for Thermoformed Millimeter Wave Freeform Optical Elements. In OSA Technical Digest, JTu2B.2.
- Chang, S., Han, J., Lee, S., Pak, S., Park, W., Kim, D. W., Kim, G. H., Lee, D., & Valls-Gabaud, D. (2021). Optical Design and Tolerance Analysis of a Three-Mirror Freeform Telescope for the MESSIER Surveyor Mission. In OSA Optical Design and Fabrication 2021 (Flat Optics, Freeform, IODC, OFT).
- Choi, H., Palisoc, A., Vikkas, A., Esparza, M., Berkson, J., Takashima, Y., Kim, D., & Walker, C. K. (2021, 2021/9/1). Mid-to-high frequency characterization of inflatable membrane optics. In Mid-to-high frequency characterization of inflatable membrane optics, 11820.
- Chung, H., Vargas, C. J., Hamden, E., McMahon, T., Gonzales, K., Khan, A. R., Agarwal, S., Bailey, H., Behroozi, P., Brendel, T., Choi, H., Connors, T., Corlies, L., Corliss, J., Ralf-Jürgen, D., Dolana, D., Douglas, E. S., Guzman, J., Hamara, D., , Harris, W., et al. (2021, 2021/8/20). Aspera: the UV SmallSat telescope to detect and map the warm-hot gas phase in nearby galaxy halos. In Aspera: the UV SmallSat telescope to detect and map the warm-hot gas phase in nearby galaxy halos, 11819.
- Davila-Peralta, C., Hyatt, J., Hatfield, Z., Peter, A. S., Allen, B. S., Nguyen, N., Ellis, W., Kim, D. W., Berkson, J., & Rodriguez, E. (2021, 2021). Electromagnetic Thermoforming to Manufacture Reflective Panels for Radio Telescopes and Downlinks. In 2021 IEEE Aerospace Conference (50100), 1-15.
- Esparza, M., Choi, H., Kang, H., d'Aubigny, C., Pandde, A., Quach, H., Chandra, A., Karrfalt, K., Takashima, Y., Palisoc, A., Arenberg, J. W., Marshall, K. G., Glynn, C., Godinez, S. M., Tafoya, M., Chalifoux, B., Walker, C., & Kim, D. (2021, 2021/8/24). Stressed deformable reflector design and pneumatic membrane antenna for cryogenic thermal vacuum chamber testing. In Stressed deformable reflector design and pneumatic membrane antenna for cryogenic thermal vacuum chamber testing, 11820.
- Han, J., Lee, S., Moon, B., Park, W., Kim, G. H., Kim, D. W., Lee, D., & Pak, S. (2021, 2021). Lightweight Aluminum Mirror with Duplex Layers. In OSA Technical Digest, OW2B.7.
- Hatfield, Z., Davila-Peralta, C., Berkson, J., Peter, A. S., Rodriguez, E., Nguyen, N., Allen, B. S., Ellis, W., Kim, D. W., & Hyatt, J. (2021, 2021). Adaptive Aluminum Thermoforming for Precision Millimeter Wave Telescope Panels. In OSA Technical Digest, OW2B.4.
- Hatfield, Z., Davila-Peralta, C., Peter, A. S., Berkson, J., Rodriguez, E., Nguyen, N., Ellis, W., Choi, H., Kim, D. W., & Hyatt, J. (2021, 2021). Surface Treatment Regimes for Solar Scatter Control in Millimeter Wave Telescope Panels. In OSA Technical Digest, OW2B.5.
- Hyatt, J., Berkson, J., Hatfield, Z., Kim, D. W., Nguyen, N., Roshi, D. A., Dharmalingam, S., & Sulzer, M. (2021). Grating lobe suppression for the next generation Arecibo Telescope concept. In International Optical Design Conference 2021, 12078.
- Jean, M., Knight, J. M., Guthery, C., Hart, M., & Kim, D. (2021, 2021/8/1). Design and calibration of a closed loop tip-tilt control for a pyramid-Shack-Hartmann hybrid wave-front sensor. In Design and calibration of a closed loop tip-tilt control for a pyramid-Shack-Hartmann hybrid wave-front sensor, 11836.
- Kim, D. (2021). Optical Design and Acceptable Tolerance Range of MESSIER satellite telescope (LAF TMS D400F3). In Optical Society of Korea (OSK) Winter Annual Meeting, F1B-II-2.
- Kim, D. (2021). PhoSim (Photon Simulator) Reliability Test for Confocal Off-Axis System. In Optical Society of Korea (OSK) Winter Annual Meeting, F1B-II-3.
- Kim, D. (2021, 2021/9/9). The evolution of OPTI513 Optical Testing course at the Wyant College of Optical Sciences. In The evolution of OPTI513 Optical Testing course at the Wyant College of Optical Sciences, 11813.
- Kim, D. W., Esparza, M., Quach, H., Rodriguez, S., Kang, H., Feng, Y., & Choi, H. (2021). Optical technology for future telescopes. In Fourth International Conference on Photonics and Optical Engineering, 11761.
- Lee, S., Park, W., Kim, Y., Chang, S., Kim, S., Kim, G. H., Kim, D. W., & Pak, S. (2021, 2021). Wavefront-based Optical Alignment of Confocal Off-Axis Freeform Reflective System. In OSA Technical Digest, JM1B.3.
- Lee, S., Park, W., Pak, S., Han, J., Kim, D., Yoo, J., Ko, J., Lee, D. H., Kim, G. H., Chang, S., Valls-Gabaud, D., & Kim, D. W. (2021, 2021). Unobscured Two-Mirror Confocal Optical System Analysis Using Application to Photon Simulator (PhoSim). In OSA Technical Digest, OTh1B.5.
- Moszko, D., Faehnle, O., Vogt, C., & Kim, D. (2021). In-process surface roughness measuring device for information-based real-time polishing process adjustment and optimization. In Eighth European Seminar on Precision Optics Manufacturing, 11853.
- Negi, V. S., Garg, H., Kumar, R. S., Tiwari, U. K., Karar, V., & Kim, D. W. (2021, 2021). Smoothing Effect Analysis for Active Fluid Jet Polishing. In OSA Technical Digest, OW2B.2.
- Palisoc, A. L., Pardoen, G., Takashima, Y., Chandra, A., Sirsi, S., Choi, H., Kim, D., Quach, H., Arenberg, J. W., & Walker, C. (2021, 2021/8/24). Analytical and finite element analysis tool for nonlinear membrane antenna modeling for astronomical applications. In Analytical and finite element analysis tool for nonlinear membrane antenna modeling for astronomical applications, 11820.
- Pullen, W. C., Wang, T., Choi, H., Ke, X., Huang, L., Idir, M., & Kim, D. W. (2021, 2021). Parametric Tool Influence Function Size Optimization. In OSA Technical Digest, JTu3B.2.
- Quach, H., Esparza, M., Kang, H., Chandra, A., Choi, H., Berkson, J., Karrfalt, K., Sirsi, S., Takashima, Y., Palisoc, A., Arenberg, J. W., Marshall, K. G., Glynn, C. S., Godinez, S. M., Tafoya, M., Walker, C., d'Aubigny, C. D., & Kim, D. (2021, 2021/8/24). Deflectometry-based thermal vacuum testing for a pneumatic terahertz antenna. In Deflectometry-based thermal vacuum testing for a pneumatic terahertz antenna, 11820.
- Serra, P., Čierny, O., Kammerer, W., Douglas, E. S., Kim, D. W., Ashcraft, J. N., Smith, G., Guthery, C., Vergoossen, T., Lohrmann, A., Bedington, R., Perumangatt, C., Ling, A., & Cahoy, K. (2021). Optical front-end for a quantum key distribution cubesat. In International Conference on Space Optics — ICSO 2020, 11852.
- Sirsi, S., Takashima, Y., Palisoc, A., Chandra, A., Walker, C. K., & Kim, D. (2021, 2021/8/24). Parametric design study of the Orbiting Astronomical Satellite for Investigating Stellar Systems (OASIS) space telescope. In Parametric design study of the Orbiting Astronomical Satellite for Investigating Stellar Systems (OASIS) space telescope, 11820.
- Takashima, Y., Sirsi, S., Choi, H., Arenberg, J. W., Kim, D., & Walker, C. (2021, 2021/8/24). All reflective THz telescope design with an inflatable primary antenna for Orbiting Astronomical Satellite for Investigating Stellar Systems (OASIS) mission. In All reflective THz telescope design with an inflatable primary antenna for Orbiting Astronomical Satellite for Investigating Stellar Systems (OASIS) mission, 11820.
- Walker, C. K., Chin, G., Aalto, S., Anderson, C. M., Arenberg, J. W., Battersby, C., Bergin, E., Bergner, J., Biver, N., Bjoraker, G. L., Carr, J., Cavalié, T., Beck, E. D., DiSanti, M. A., Hartogh, P., Hunt, L. K., Kim, D., Takashima, Y., Kulesa, C., , Leisawitz, D., et al. (2021, 2021/8/24). Orbiting Astronomical Satellite for Investigating Stellar Systems (OASIS): following the water trail from the interstellar medium to oceans. In Orbiting Astronomical Satellite for Investigating Stellar Systems (OASIS): following the water trail from the interstellar medium to oceans, 11820.
- Chandra, A., Sirsi, S., Choi, H., Phan, A., Takashima, Y., Kim, D., & Walker, C. (2020, 01). Thermally formed inflatable reflectors for space telescopes. In IEEE.
- Choi, H., Esparza, M. A., Lamdan, A., Feng, Y., Milster, T., Apai, D., & Kim, D. W. (2020). In-process metrology for segmented optics UV curing control. In Optical Manufacturing and Testing XIII, 11487.
- Choi, H., Trumper, I., Feng, Y., Kang, H., Hamden, E., & Kim, D. W. (2020). Hyperion: Far-UV cross dispersion spectroscope design. In Optical Manufacturing and Testing XIII, 11487.
- Esparza, M. A., Choi, H., & Kim, D. W. (2020). Alignment of Multi-Order Diffractive Engineered (MODE) lens segments using the Kinematically-Engaged Yoke System. In Optical Manufacturing and Testing XIII, 11487.
- Feng, Y., Ashcraft, J. N., Breckinridge, J. B., Harvey, J. E., Douglas, E. S., Choi, H., Lillie, C., Hull, T., & Kim, D. W. (2020). Topological pupil segmentation and point spread function analysis for large aperture imaging systems. In AOPC 2020: Optics Ultra Precision Manufacturing and Testing, 11568.
- Han, J., Park, W., Chang, S., Lee, S., Ahn, H., Kim, D. W., Kim, G. H., Lee, D., Lee, H., & Pak, S. (2020). Tolerance analysis of wide field of view confocal off-axis telescope system using freeform mirrors for common optics MWIR/LWIR sensors onboard UAVs: linear astigmatism free three mirror system D70F1.4. In Electro-Optical and Infrared Systems: Technology and Applications XVII, 11537.
- Kang, H., Quach, H., Choi, H., Smith, G. A., & Kim, D. W. (2020). Computational alignment of on-machine deflectometry. In Optical Manufacturing and Testing XIII, 11487.
- Kim, D. W., Aftab, M., Trumper, I., Graves, L., Quach, H., Kang, H., Yoo, H., Lowman, A., Smith, G., Dubin, M., Oh, C., Hyatt, J., Davila-Peralta, C., & Choi, H. (2020). Reconfigurable dynamic optical system design, test, and data analysis. In Optics and Photonics for Advanced Dimensional Metrology, 11352.
- Kim, D. W., Walker, C., Apai, D., Milster, T., Takashima, Y., Schneider, G., Liang, R., Kim, Y., Fellows, C., Zhang, Y., Gasper, A., Smith, I., Crowe, D., Bixel, A., OâDougherty, S., Sirsi, S., Chandra, A., Phan, A., Wang, Z., & Arenberg, J. (2020, 01). Disruptive space telescope concepts, designs, and developments: OASIS and Nautilus -INVITED. In EPJ Web of Conferences, 238, 06001.
- Maier, E. R., Douglas, E. S., Kim, D. W., Su, K., Ashcraft, J. N., Breckinridge, J. B., Choi, H., Choquet, E., Connors, T. E., Durney, O., Gonzales, K. L., Guthery, C. E., Haughwout, C. A., Heath, J. C., Hyatt, J., Lumbres, J., Males, J. R., Matthews, E. C., Milani, K., , Montoya, O. M., et al. (2020). Design of the vacuum high contrast imaging testbed for CDEEP, the Coronagraphic Debris and Exoplanet Exploring Pioneer. In Space Telescopes and Instrumentation 2020: Optical, Infrared, and Millimeter Wave, 11443.
- Martin, H. M., Ceragioli, R., Jannuzi, B., Kim, D. W., Kingsley, J. S., Law, K., Loeff, A., Lutz, R. D., McMahon, T. J., Meyen, S., Oh, C. J., Tuell, M. T., Weinberger, S. N., West, S. C., & Wortley, R. (2020). Manufacture of 8.4 m segments for the GMT primary mirror. In Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV, 11451.
- Milster, T. D., Apai, D., Kim, D. W., Kim, Y. S., Kim, G. H., Zhang, Y., Choi, H., Esparza, M., Spires, O., Liang, R., Purvin, K., & Fellows, C. (2020). Progress toward optical design and fabrication of ultralight, large aperture transmissive lenses for space telescopes. In Frontiers in Optics / Laser Science.
- Park, W., Pak, S., Chang, S., Lee, H., Lee, S., & Kim, D. W. (2020). Optical sensitivity analyses of various reflective systems: on-axis, common off-axis, and confocal off-axis designs. In Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV, 11451.
- Quach, H., Berkson, J., Sirsi, S., Choi, H., Dominguez, R., Duffy, B., Lesser, D., Takashima, Y., Palisoc, A., Walker, C., & Kim, D. W. (2020). Full-aperture optical metrology for inflatable membrane mirrors. In Optical Manufacturing and Testing XIII, 11487.
- Quach, H., Kang, H., Choi, H., & Kim, D. W. (2020). Non-planar illumination sources for deflectometry. In Optical Manufacturing and Testing XIII, 11487.
- Rakich, A., Choi, H., Veillet, C., Hill, J. M., Bec, M., Zhang, Y., Brendel, T., Sitarski, B., Gardiner, M., Kim, D. W., & Rodriguez, S. (2020). A laser-truss based optical alignment system on LBT. In Ground-based and Airborne Telescopes VIII, 11445.
- Rodriguez, S., Rakich, A., Hill, J., Kuhn, O., Brendel, T., Veillet, C., Kim, D. W., & Choi, H. (2020). Implementation of a laser-truss based telescope metrology system at the Large Binocular Telescope. In Optical Manufacturing and Testing XIII, 11487.
- Apai, D., Milster, T. D., Kim, D. W., Bixel, A., Schneider, G., Rackham, B. V., Liang, R., & Arenberg, J. (2019). Nautilus Observatory: a space telescope array based on very large aperture ultralight diffractive optical elements. In Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems II, 11116.
- Breckinridge, J. B., Harvey, J. E., Irvin, R., Chipman, R., Kupinski, M., Davis, J., Kim, D., Douglas, E., Lillie, C. F., & Hull, T. (2019). ExoPlanet Optics: conceptual design processes for stealth telescopes. In UV/Optical/IR Space Telescopes and Instruments: Innovative Technologies and Concepts IX, 11115.
- Choi, H., Kam, J., Berkson, J. D., Graves, L. R., Lei, H., & Kim, D. W. (2019). Robust and objective automatic optical surface inspection using modulated dark field phasing illumination. In Applied Optical Metrology III, 11102.
- Kang, H., Thompson, D., Conrad, A. l., Vogel, C., Lamdan, A., & Kim, D. W. (2019). Modular plug-in extension enabling cross-dispersed spectroscopy for Large Binocular Telescope. In Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems II, 11116.
- Kim, D. W., Kim, G., Guo, X., Graves, L., Trumper, I., Shu, Y., Aftab, M., & Choi, H. (2019, Spring). Full Spectrum Big Data Analysis for Dynamic Freeform Optics Manufacturing. In International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2019).
- Kim, D. W., Trumper, I., Graves, L., Aftab, M., Choi, H., Kellermeyer, B., Huang, L., Lowman, A. E., & Oh, C. J. (2019). Fabrication and Measurement of Large Scale Freeform Optics. In Optical Design and Fabrication 2019 (Freeform, OFT).
- Kim, D., Aftab, M., Trumper, I., Graves, L., Quach, H., Kang, H., Guo, X., & Choi, H. (2019, Spring). Programmatic Large Precision Optics Manufacturing. In Proceedings of the International Conference on Optics and Electro-Optics (ICOL-2019).
- Kim, Y., Shin, S., Shin, S., Hwang, C., Kang, H., & Kim, D. W. (2019, Spring). Wide-Field Freeform Projection Lens/Module for Augmented Reality. In International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2019).
- Quach, H., Graves, L., Kang, H., & Kim, D. (2019). Electrically-modulated optoelectronics-based infrared source enabling ground surface precision deflectometry. In Advances in Optoelectronic Technology and Industry Development, 3-12.
- Apai, D., Milster, T., Arenberg, J., Kim, D., Liang, R., Bixel, A., Fellows, C., & Grunsfeld, J. (2018, feb). Nautilus Deep Space Observatory: A Giant Segmented Space Telescope Array for a Galactic Biosignature Survey. In Deep Space Gateway Concept Science Workshop, 2063.
- Burge, J. H., & Smith, G. A. (2018, 2018/9/14). Chebyshev gradient polynomials for high resolution surface and wavefront reconstruction. In SPIE, 10742.
- Fahnle, O., & Kim, D. (2018, 2018/8/7). Closed-loop next generation laser polishing. In SPIE, 10829.
- Graves, L. R., J., C., & W., D. (2018, 2018/9/14). Model-free optical surface reconstruction from deflectometry data. In SPIE, 10742.
- Kingsley, J. S., Martin, H. M., & Jannuzi, B. T. (2018, 2018/7/6). An inexpensive turnkey 6.5m observatory with customizing options. In SPIE, 10700.
- Martin, H. M., Jannuzi, B. T., W., D., Kingsley, J. S., Lutz, R. D., McMahon, T. J., J., C., Tuell, M. T., Weinberger, S. N., & West, S. C. (2018, 2018/7/10). Manufacture of primary mirror segments for the Giant Magellan Telescope. In SPIE, 10706.
- Takashima, Y., Hellman, B., Rodriguez, J., Chen, G., Smith, B., Gin, A., Espinoza, A., Winkler, P., Perl, C., Luo, C., Kang, E., Kim, Y., Choi, H., & Kim, D. (2018). MEMS-based Imaging LIDAR. In Light, Energy and the Environment 2018 (E2, FTS, HISE, SOLAR, SSL).
- Aftab, M., Trumper, I., Huang, L., Choi, H., Zhao, W., Graves, L., Oh, C. J., & Kim, D. W. (2017, Fall). Dynamic metrology and data processing for precision freeform optics fabrication and testing. In Fourth European Seminar on Precision Optics Manufacturing, 10326.
- Choi, H., Trumper, I., Dubin, M., Zhao, W., & Kim, D. W. (2017, Fall). Simultaneous angular alignment of segmented mirrors using sinusoidal pattern analysis. In Optical System Alignment, Tolerancing, and Verification XI, 10377.
- Kim, D. W., Trumper, I., Choi, H., Graves, L., Aftab, M., Kang, H., Oh, C., Lowman, A., Smith, G., Martin, H. M., & others, . (2017, Fall). Fabrication and Dynamic Deflectometry Testing Methods for Freeform and Deformable Optics. In Freeform Optics.
- Rice, J. A., Hart, M., Corral, E. L., Gou, X., Kim, D. W., Rice, J. A., Hart, M., Corral, E. L., Gou, X., Kim, D. W., Rice, J. A., Hart, M., Corral, E. L., Gou, X., & Kim, D. W. (2017, July). Fabrication and Implementation of a New Ceramic Material in an Adaptive Optics System. In OSA Optical Fabrication and Test.
- Rice, J. A., Hart, M., Kim, D. W., Corral, E., Guo, X., & Pavlica, K. (2017, Fall). Fabrication and Implementation of a New Ceramic Material in an Adaptive Optics System. In Optical Fabrication and Testing.
- Trumper, I., Choi, H., & Kim, D. W. (2017, Fall). Instantaneous phase mapping deflectometry for dynamic deformable mirror characterization. In Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems, 10401.
- Walker, C. K., Smith, I. S., Goldsmith, P. F., O'Dougherty, S., Takashima, Y., & Kim, D. (2017, Fall). Spherical reflectors for space based telescopes. In IEEE MTT-S International Microwave Symposium (IMS), 1884-1887.
- Choi, H., Trumper, I., Guo, X., Shannon, D., & Kim, D. W. (2016, Winter). Extremely Large, Precise and Priceless Freeform Optics. In International Conference on Positioning Technology.
- Kim, D. W., Aftab, M., Choi, H., Graves, L., & Trumper, I. (2016, Winter). Optical Metrology Systems Spanning the Full Spatial Frequency Spectrum. In Frontiers in Optics (OSA).
- Kim, D. W., Burge, J. H., Davis, J. M., Martin, H. M., Tuell, M. T., Graves, L. R., & West, S. C. (2016, July). New and improved technology for manufacture of GMT primary mirror segments. In SPIE.
- Kim, D. W., Burge, J. H., Davis, J. M., Martin, H. M., Tuell, M. T., Graves, L., West, S. C., Kim, D. W., Burge, J. H., Davis, J. M., Martin, H. M., Tuell, M. T., Graves, L., & West, S. C. (2016, July). New and improved technology for manufacture of GMT primary mirror segments. In Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, Proc. SPIE 9912.
- Kim, D. W., Oh, C., Lowman, A., Smith, G. A., Aftab, M., & Burge, J. H. (2016, July). Manufacturing of super-polished large aspheric/freeform optics. In SPIE.
- Martin, H. M., Angel, J. R., Angeli, G., Burge, J. H., Gressler, W., Kim, D. W., Kingsley, J. S., Law, K., Liang, M., Neill, D., Sebag, J., Strittmatter, P. A., Tuell, M. T., West, S. C., Woolf, N. J., & Xin, B. (2016, July). Manufacture and final tests of the LSST monolithic primary/tertiary mirror. In Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, Proc. SPIE 9912.
- Martin, H. M., Angel, J., Angeli, G. Z., Burge, J. H., Gressler, W., Kim, D. W., Kingsley, J. S., Law, K., Liang, M., Neill, D., Sebag, J., Strittmatter, P. A., Tuell, M. T., West, S. C., Woolf, N. J., & Xin, B. (2016, July). Manufacture and final tests of the LSST monolithic primary/tertiary mirror. In SPIE.
- Martin, H. M., Burge, J. H., Davis, J. M., Kim, D. W., Kingsley, J. S., Law, K., Loeff, A., Lutz, R. D., Merrill, C., Strittmatter, P. A., Tuell, M. T., Weinberger, S. N., & West, S. C. (2016, July). Status of mirror segment production for the Giant Magellan Telescope. In SPIE.
- Martin, H. M., Burge, J. H., Davis, J. M., Kim, D. W., Kingsley, J. S., Law, K., Loeff, A., Lutz, R. D., Merrill, C., Strittmatter, P. A., Tuell, M. T., Weinberger, S. N., West, S. C., Martin, H. M., Burge, J. H., Davis, J. M., Kim, D. W., Kingsley, J. S., Law, K., , Loeff, A., et al. (2016, July). Status of mirror segment production for the Giant Magellan Telescope. In Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, Proc. SPIE 9912.
- Martin, H. M., Hill, J., & Kim, D. W. (2016, Winter). 30 years of mirror making at the Richard F. Caris Mirror Lab. In Frontiers in Optics (OSA).
- Oh, C. J., Lowman, A. E., Smith, G. A., Su, P., Huang, R., Su, T., Kim, D. w., Zhao, C., Zhou, P., & Burge, J. H. (2016, July). Fabrication and testing of 4.2m off-axis aspheric primary mirror of Daniel K. Inouye Solar Telescope. In SPIE.
- Zhao, W., Graves, L. R., Huang, R., Song, W., & Kim, D. (2016, Sept). Iterative surface construction for blind deflectometry. In Proc. SPIE.
- Choi, J. N., Ryu, D., Kim, S., Graves, L., Su, P., Huang, R., & Kim, D. W. (2015, Nov). Integrated Ray Tracing (IRT) simulation of SCOTS measurement of GMT fast steering mirror surface. In SPIE Optical Engineering+ Applications.
- Davis, J. M., Martin, H. M., Kim, D. W., Loeff, A. R., Kenagy, K. L., Sisk, R. W., & Hagen, J. R. (2015, Fall). Advances in diamond generating for 8.4 meter telescope mirrors. In SPIE Optifab.
- Herzog, H., Segal, J., Smith, J., Bates, R., Calis, J., De La Torre, A., Kim, D. W., Mici, J., Mireles, J., Stubbs, D. M., & Wicker, R. (2015, Sept). Optical fabrication of lightweighted 3D printed mirrors. In Proc. SPIE, 9573, 957308-957308-15.
- Kim, D. W., Su, P., Oh, C. J., & Burge, J. H. (2015, Fall). Extremely Large Freeform Optics Manufacturing and Testing. In Conference on Lasers and Electro-Optics/Pacific Rim.
- Burge, J. H., Kim, D. W., & Martin, H. M. (2014). Process optimization for polishing large aspheric mirrors. In SPIE Astronomical Telescopes+ Instrumentation.
- Kim, D. W., Oh, C. J., Su, P., & Burge, J. H. (2014). Advanced Technology Solar Telescope 4.2 m Off-axis Primary Mirror Fabrication. In Optical Fabrication and Testing.
- Maldonado, A., Kim, D. W., Su, P., & Burge, J. H. (2014). New Phase Measuring Deflectometry Device for Mid-to-High Spatial Frequency Surface Metrology. In Optical Fabrication and Testing.
- Martin, H., Allen, R., Burge, J. H., Davis, J., Davison, W., Johns, M., Kim, D., Kingsley, J. S., Law, K., Lutz, R., & others, . (2014). Production of primary mirror segments for the Giant Magellan Telescope. In SPIE Astronomical Telescopes+ Instrumentation.
- Del Hoyo, J., Kim, D. W., & Burge, J. H. (2013). Super-smooth optical fabrication controlling high-spatial frequency surface irregularity. In SPIE Optical Engineering+ Applications.
- Kim, D. W., Kim, B., Zhao, C., Oh, C., & Burge, J. H. (2013). Algorithms for surface reconstruction from curvature data for freeform aspherics. In SPIE Optical Engineering+ Applications.
- Kim, D. W., Martin, H. M., & Burge, J. H. (2013). Optical surfacing process optimization using parametric smoothing model for mid-to-high spatial frequency error control. In SPIE Optifab.
- Taniguchi, K., Kim, D. W., Shimura, K., & Burge, J. H. (2013). Steerable diffraction limited line illumination system using deformable mirror. In SPIE Optical Engineering+ Applications.
- Burge, J. H., & Kim, D. W. (2012). The Thermal Sieve: a diffractive baffle that provides thermal isolation of a cryogenic optical system from an ambient temperature collimator. In SPIE Astronomical Telescopes+ Instrumentation.
- Kim, D. W., Martin, H., & Burge, J. H. (2012). Control of mid-spatial-frequency errors for large steep aspheric surfaces. In Optical Fabrication and Testing.
- Martin, H., Allen, R., Burge, J., Kim, D., Kingsley, J., Law, K., Lutz, R., Strittmatter, P., Su, P., Tuell, M., & others, . (2012). Production of 8.4 m segments for the Giant Magellan Telescope. In SPIE Astronomical Telescopes+ Instrumentation.
- Smith, G. A., Lewis, B. J., Kim, D. W., Palmer, M., Loeff, A. R., & Burge, J. H. (2012). SAGUARO. In Optical Fabrication and Testing, OFT 2012.
- Smith, G. A., Lewis, B. J., Kim, D. W., Palmer, M., Loeff, A. R., & Burge, J. H. (2012). SAGUARO: data analysis software for optical engineering. In Optical Fabrication and Testing.
- Smith, G. A., Lewis, B. J., Palmer, M., Kim, D. W., Loeff, A. R., & Burge, J. H. (2012). Open source data analysis and visualization software for optical engineering. In SPIE Optical Engineering+ Applications.
- Johnson, J. B., Kim, D. W., Parks, R. E., & Burge, J. H. (2011). New approach for pre-polish grinding with low subsurface damage. In SPIE Optical Engineering+ Applications.
- Kim, D. W., Lewis, B. J., & Burge, J. H. (2011). Open-source data analysis and visualization software platform: SAGUARO. In SPIE Optical Engineering+ Applications.
- Kim, D. W., Martin, H. M., & Burge, J. H. (2011). Calibration and optimization of computer-controlled optical surfacing for large optics. In SPIE Optical Engineering+ Applications.
- Cai, W., Kim, D. W., Zhou, P., Parks, R. E., & Burge, J. H. (2010). Interferometer calibration using the random ball test. In Optical Fabrication and Testing.
- Kim, D. W., & Burge, J. H. (2010). Cryogenic Thermal Mask for Space-cold Optical Testing for Space Optical Systems. In Optical Fabrication and Testing.
- Martin, H., Allen, R., Burge, J., Kim, D., Kingsley, J., Tuell, M., West, S., Zhao, C., & Zobrist, T. (2010). Fabrication and testing of the first 8.4-m off-axis segment for the Giant Magellan Telescope. In SPIE Astronomical Telescopes+ Instrumentation.
- Ryu, D., Kim, S., Kim, D. W., Lee, J., Lee, H., Park, W. H., Seong, S., & Ham, S. (2010). Integrated ray tracing simulation of annual variation of spectral bio-signatures from cloud free 3D optical Earth model. In SPIE Optical Engineering+ Applications.
- Kim, D. W., Park, W. H., Kim, S., & Burge, J. H. (2009). Edge tool influence function library using the parametric edge model for computer controlled optical surfacing. In SPIE Optical Engineering+ Applications.
- Park, W. H., Kim, D. W., Burge, J. H., & Kim, S. (2008). Parametric model for mirror deflection with axial support. In Optical Fabrication and Testing.
- Kim, D. W., & Kim, S. (2005). Novel simulation technique for efficient fabrication of 2-m class hexagonal segments for extremely large telescope primary mirrors. In Photonics Asia 2004.
Poster Presentations
- Aftab, M., Burge, J., & Kim, D. W. (2015, Fall). Orthonormal rectangular vector polynomials. Industrial Affiliates workshop, College of Optical Sciences.
- Graves, L., Su, T., Su, P., Burge, J., & Kim, D. W. (2015, Fall). Measurement of Freeform Objects with IR Deflectometery. Industrial Affiliates workshop, College of Optical Sciences.
Others
- Kim, D. W., Su, T., Su, P., Oh, C., Graves, L., & Burge, J. (2015, July). Accurate and rapid IR metrology for the manufacture of freeform optics. SPIE Newsroom.